Power Supply Tester- 3600A Series Automatic Power Supply Tester RS-232, Centronics

3600A Series Automatic Power Supply Tester RS-232, Centronics

*Application Notes

901 3600A Series product option descriptions

630W For four Output AC-DC Power Supplies Tester

Hold-On Adjust.
Load Regulation.
Line Regulation.
Combine Regulation.
Efficiency.
Power Good / Fail.
Set-up / Hold-up time.
P-P Noise (PARD).
OVP Testing.
OCP Testing.
Short Testing.

All in one, Stand Alone SMPS tester, 3600A series includes 800VA AC source, Four DC Load with Flexible Polarity configuration, One OVP, Two Timing and Four PARD Measurements.

Manual or Computer Edit Mode.
Manual, Auto, or Step Testing Mode.
Centronics for all data direct print output or store on file.
RS-232C for Download/Upload Testing Procedure.
Electronic Calibration.
Ready to use Testing Fixture.
Re-installable Option for PARD, Line Regulation, AC Meter, or change to DC Meter.

	Up to four output Power supply with any configuration of 2+/2-, 3+/1-, or 4+ Single, Qual, Tripple, or Quad Total output power up to 630W power supply. AC / DC Power Supply. DC / DC Converter. Production Line. Quality Control. Incoming Inspection. Engineering Evaluation.

The 3600A series was designed for testing AC / DC and DC / DC power supply up to 630W, it will accommodate power supplies with as many as four outputs. It will store test programs for eight different power supply specifications. Each of these tests may include up to 32 steps of subtesting. Testing procedures can be generated and edited manually via front panel or remotely using Application

Software 9800A; Testing may be performed in the Automatic or Manual mode. The manual mode accommodates individual selection of up to 32 test steps. The Automatic mode will provide Pass/Fail and Go/NG testing Stored programs and test data may be print out via Centronic interface. This information may also be uploaded to or downloaded from a PC via the RS-232C port.

The 3600A series is ideal for statistical Analysis where UUT selective data is needed as data is visible on the front display. Optional, 5030 OVP DC voltage source provides OVP testing in Load channel 1 and 2. 9500 and 9501 offer a stable AC Voltage source, yielding extremely accurate Line regulation. The 9900

Twin Testing Fixture is designed to yield higher throughput making it ideal for production and incoming inspection applications. Other test fixtures include the 9910 and 9920 which are general purpose test fixtures. Remote control of function keys 1 to 8 is made by 9930. Option 3600A001 through 3600A004 offers a different configuration to meet the testing requirement and budget of varies field; You can choose with or without PARD, Line-regulation, AC Meter, DC Meter, where 3600A004 to 3602A001 is suitable for DC / DC Testing; Of course, you can re-install these option after purchase 3600A.